HXT900 9g Micro Servo
Posted on | November 12, 2009 | 1 Comment
Really nice servo, cheap and reliable, one of the best 9gr servos you can find online.
in hobbycity, each one pass a good quality check (you can find a QC passed sticker at the bottom.
Those servos are strong, fast enough, and has a good resolution, about 200 steps total.
Will work also in RC planes like small delta wings, 3d foamies, can be used for all sizes of gas engines as throttle, for small robots and much more!
All the specifications are almost 100% true! and those servos has a general use 9gr size so it will fit almost any rc airplane up to 1kg, and any helicopter up to 450 size.
Also, HobbyCity.com has an excellent service, many other members that bought items in there site, and have problems with it, they send it back and get new items for free, so you will be satisfied for sure.
This is my most common use servo, fits everywhere, cheap, reliable what else do we need?
Nylon gears, that are pretty strong, you can always replace the gears from HK but, its so cheap, just buy a new one!
What I didn’t like is that they shorten the servo leads to 15cm wire, very short!
Size : 21x12x22 mm / 0.74×0.42×0.78 in
Voltage : 3v ~ 6v
Weight: 9.5g not 9.0 as they claim
Speed : 0.13 not .12 as they state sec/60(4.8V)
Torque : 1.5 kg-cm not 1.6 as they state
Teflon Bushing, 15cm wire, coreless motor
for 5 of those servos, 21.04$ with unregistered shipping from hobbycity.com, my suggestion is to buy as much as you can, you will use those, buy like 10.
Comments
One Response to “HXT900 9g Micro Servo”
Leave a Reply
September 22nd, 2011 @ 8:53 pm
Is it easy to shorten the leads on the HXT900 servo?